In the industrial production, the existence of belt conveyor manufacturers is very important. Conveyor Chain can bear the gravity that cannot be touched by human beings, and can also make the work flow become more standard, so as to improve the product quality and production speed. What are the characteristics of Shanghai conveyor? What should be done when blocking occurs? Let's see the introduction below.
Features of belt conveyor:
1: anti winding
Because the shaftless screw conveyor has no interference from the central axis, the materials transported are not easy to be wound, so that the materials can be transported more smoothly and reach a larger conveying volume.
2: environmental protection
As the conveying process is closed, it can ensure that the conveyed materials do not leak or pollute, and the spiral surface is easy to clean.
3: energy saving
Material transportation is very smooth, as long as the low-speed operation, which can reduce energy consumption.
4: high temperature resistance
The material of this conveyor is very special, it can work normally under high temperature, it is economical and durable, and its service life is very long.
5: compact structure
The structure design of the equipment is scientific and reasonable, small and flexible, and can effectively save the occupied space.
Treatment method of blocking material for Shanghai conveyor:
1: adjust the speed
If the rotating speed of the equipment is too fast, it is easy to block the materials. At this time, the problem can be solved by slowing down the rotating speed of the equipment.
2: start without load
In order to ensure the stability and safety of the operation, the load carrying situation cannot occur during the start and stop.
3: feed evenly
When feeding, it is necessary to control the quantity and speed of feeding, so as to achieve continuity and uniformity.
4: improve the discharge port
The discharge port can be lengthened or a rotating blade in the opposite direction can be installed at the end, so as to ensure smooth discharge without blocking.
5: reduce the size of the intermediate bearing
Reduce the transverse dimension of the intermediate bearing, so as to reduce the possibility of material blockage of the bearing.
6: set up anti blocking door
When the materials are piled up, the anti blocking door can be opened to prevent the occurrence of blocking.